OriginalRoland Ink Pump for SJ1045

Installed Position & Function

• This pump is typically used in the printer maintenance system for suction, circulation, or waste-ink transfer depending on machine design.
• It is generally installed between the maintenance station, tubing assembly, and waste or cleaning path.
• Stable pump performance helps support cleaning cycles, consistent ink flow, and daily printer reliability.

Recommended Use

• Referenced machine models: SJ1045, SJ1000, SJ1045EX, AJ1000, AJ1045, SJ-740, SJ-540, SJ-645EX, SJ-745EX, SJ-1000, SJ-1045EX, SJ-545EX, SP-300, SP-300V, SP-540, SP-540V.
• Suitable for water-based printing environments when the connector layout and tubing size match the reference pump.
• Recommended when suction becomes weak, cleaning cycles become unstable, waste-ink discharge slows down, or the reference pump becomes noisy.

Buying Notes

• Compare pump voltage, tube size, connector position, and mounting method with the model-reference part.
• If your printer has multiple revisions, match the manufacturer part number and maintenance-station layout before ordering.
• For preventive maintenance, buyers often replace the pump together with cap tops, tubes, or wipers when the maintenance system shows wear.

Typical Failure Symptoms

• Weak suction during cleaning cycles, unstable priming, or slow waste-ink discharge from the maintenance station.
• Unusual pump noise, inconsistent cleaning results, or repeated nozzle dropouts after normal maintenance.
• Ink residue around tubes or a maintenance station that no longer pulls ink smoothly during service cycles.

Fitment Checklist

• Referenced machine models: SJ1045, SJ1000, SJ1045EX, AJ1000, AJ1045, SJ-740, SJ-540, SJ-645EX, SJ-745EX, SJ-1000, SJ-1045EX, SJ-545EX, SP-300, SP-300V, SP-540, SP-540V.
• Match voltage, connector style, tube count, tube direction, bracket position, and overall body dimensions with the reference pump.
• If your printer has multiple pump revisions, compare the old part directly and confirm the manufacturer reference before purchase.

Service Pairing Suggestions

• Buyers often inspect cap tops, waste tubes, dampers, and wipers at the same time when replacing a pump.
• If the machine has been standing idle for a long time, check whether the tubing and capping station also need service.
• Use this part in a water-based workflow only when the fluid path and sealing arrangement match the reference system.