Roland Belt for RS640

Roland Belt for RS640 / RS540 / VP540 / VP540i

Keep your Roland printer running smoothly with this replacement drive belt. Designed for RS640, RS540, VP540, and VP540i, it helps maintain precise motion transmission and consistent media handling during daily production.

Key Benefits

• Model-specific fit: Sized and routed for RS/VP 54"/64" chassis to match the reference belt path.
• Stable transmission: Reliable engagement with pulleys helps reduce slip, banding, and feed errors.
• Durable construction: Wear-resistant belt body with reinforced fiber for long service intervals.
• Easy maintenance: Installs using standard service steps; no firmware or electrical changes required.

Compatibility

Roland: RS640, RS540, VP540, VP540i

Typical Use Cases

• Replacing a stretched, cracked, or noisy belt.
• Resolving feed irregularities and improving print registration.
• Preventive maintenance during carriage or pulley service.

Specifications

Installation & Care Tips

1. Power off and unplug the printer before service.
2. Inspect pulleys and the tensioner; clean debris and replace worn parts together with the belt if needed.
3. Route the belt according to the reference path and set even tension—too loose may slip, too tight may wear bearings.
4. After installation, run a feed test and print a nozzle/check pattern to confirm tracking and registration.

Notes

• This listing is for the belt only; pulleys, shafts, and tensioners are not included.
• Professional installation is recommended if you are unfamiliar with mechanical alignment and belt tensioning.