UV Metal Pretreatment Coating
- $10.00
- $10.00
- Unit price
- per
All prices are in USD. Available payment methods and shipping options are shown at checkout based on destination and order details.
*
Note
Secure payments
Order issue support
Product Details
xUVINKPRO UV Metal Pretreatment Coating is a UV printing pretreatment coating for tested metal substrates. It is not UV ink and it is not UV varnish. Test adhesion, curing, surface preparation, and ink-system compatibility on the actual substrate before production.
UVINKPRO UV Metal Coating
UVINKPRO UV Metal Coating cures in seconds under UVA lamps to create an ultra-tough, chemical-resistant film that locks onto bare or painted metals. The result is a brilliant, long-lasting finish that protects signage, nameplates and industrial parts from corrosion, abrasion and fading.
Key Benefits
- Instant UV cure — production speed depends on equipment and settings
- hardness information available on request for extreme scratch resistance
- Excellent adhesion to aluminum, steel & stainless substrates (Cross-cut 0-1)
- Corrosion & solvent resistance; maintains gloss after 1000 h corrosion-resistance test
- Low-odor formulation; supplier documents can be checked on request where applicable
Recommended Uses
- Outdoor & indoor metal signage, display panels
- Engraved or printed nameplates, rating plates
- Consumer electronics housings, phone & laptop cases
- Stainless drinkware, aluminum tumblers, decorative metal parts
Technical Specs
- Viscosity (25 °C): 300 – 450 cP
- Optimal cure dose: 900 – 1300 mJ/cm² UVA
- Gloss: 85 + GU @ 60° (gloss version) / 25 ± 5 GU (matte version)
- Shelf life: 12 months (sealed, 20 – 25 °C)
Packaging
- 1 kg & 5 kg HDPE bottles
- 20 kg pails for automated lines
Need tech sheets or bulk pricing? Chat with our support team on WhatsApp for a fast response.
Recommended Substrates
- Recommended for metal panels, coated metal parts, aluminum, stainless steel, and decorative metal surfaces.
- Used to improve adhesion, surface performance, or bonding stability before or after printing depending on the production workflow.
- Always test on the actual substrate and curing setup before full production.
Compatibility Notes
- Confirm the coating process together with your UV ink, printhead configuration, and curing energy before bulk use.
- Check whether the surface requires cleaning, flame treatment, corona treatment, or another pre-treatment process.
- For stable production, confirm application thickness, drying or curing conditions, and final adhesion requirements.
Typical Applications
- Industrial decoration, promotional products, rigid signage, packaging, and specialty surface printing.
- Workflows where buyers need better adhesion and more reliable surface performance on difficult materials.
- Suitable for sampling, small-batch production, and scale-up after adhesion testing is approved.
Surface Preparation Checklist
- For metal surfaces, remove oil, dust, and oxide contamination before coating and printing.
- Run a small adhesion test before production and confirm whether wiping, degreasing, flame treatment, or corona treatment is required.
- Check coating thickness, flash-off or drying time, and UV curing energy before moving from sample work to batch production.
Workflow Notes
- Confirm whether the coating is used as a primer, adhesion promoter, or post-treatment step in your printing workflow.
- Buyers usually validate cross-hatch adhesion, tape test results, scratch resistance, and final appearance on the real substrate first.
- Use this product only after confirming compatibility with your solvent printing process and target material.
Buying Notes
- If the same material is supplied by multiple factories, test each substrate batch because surface energy can vary.
- For export or contract production, lock down the approved process window before ordering larger volumes.
- When in doubt, request a sample workflow or confirm the intended application with your production engineer before purchase.
Shipping & Return
xReturns Policy
Please confirm product model, specifications, and compatibility before ordering. Buyer-side compatibility questions, buyer-side configuration issues, or installation-related issues will be reviewed according to applicable law, product condition, order records, and this policy.
Technical, consumable, opened, installed, used, customized, special-order, or fluid-contact items usually require written review before a return or other remedy is confirmed. Any return, exchange, refund, repair, replacement, or other remedy will be reviewed according to applicable law, product condition, order records, and this policy.
If your order arrives damaged or incorrect, please contact us as soon as possible, preferably within 72 hours after delivery, with photos, package details, and your order number. This timeframe helps speed up case handling and does not limit any mandatory rights under applicable law.
Shipping
Shipping time, stock availability, duties, and import charges may vary by product and destination. Available checkout and shipping details are shown before payment when Shopify checkout can calculate them for the destination.
For urgent shipment timing or fitment help, contact us before purchase.